top of page

tJRS Opta Joint Test Bench

SKU TJMXX-0330-CRJEXX

tJRS Opta Joint Test Bank

The tJRS Opta is the only fully automated joint test bench that is based on a threaded fastener. This means that the joint conditions can be set in the same way as in real fastener applications, and also the joint can be "backed up" automatically. As a result, tools can be tested offline in the most realistic conditions of any joint simulator bench, quickly and efficiently.

Description

Traditionally, automated joint test stands have used friction brake systems instead of a threaded fastener. The reasons for this were to overcome the two main problems of having to revert, or roll back, after each summary and the cumbersome nature of reconfiguring the board feature.

While friction brakes can be easily reset, eliminating the kickback problem, they introduce many of their own problems, often resulting in the simulator having significantly different properties than the actual joints on which the tools will be used. Crane's tJRS torque test bench sets the standard for precise and precise torque delivery.

Specifications

Key Features

  • Torque or force indicator and data collector
  • A threaded closure and nut.
  • Fully automated fastener quick release and variable bond rate from soft to hard
  • Tool test according to VDI / VDE2647
  • Comprehensive management software (OMS)
  • Torque, angle and impulse count.
  • Track, peak, first peak (click) and pulse measurement
  • Standard versions available in 330, 500 and 1000Nm.

 

tJRS Opta models

Part number Description
TJMXX-0330-CRJEXX 330Nm tJRS Opta
TJMXX-0500-CRABCX 500Nm tJRS Opta.
TJ3FX-1000-CR01XX 1000Nm tJRS Opta.

 

 

 

 

tJRS Opta technical specifications

Units of measurement

330Nm tJRS Opta.
Maximum torque: 330Nm.
Minimum torque: 1Nm.

500Nm tJRS Opta.
Maximum torque: 500Nm.
Minimum torque: 1Nm.

1000Nm tJRS Opta.
Maximum torque: 1000Nm.
Minimum torque: 1Nm.
Weight Depends on configuration.
Beams

500Nm tJRS Opta.
500Nm, 100Nm and 10Nm.

1000Nm tJRS Opta.
1000Nm, 330Nm and 25Nm
Bolts and Nuts Bolts and nuts are replaceable and removable from the top.
Each bottom bolt, thread and nut has its own automatic greasing system.
Adapters provided to connect the Transducer to the nut on the bolt
TorqueStar Opta The standard TorqueStar Opta with Opta Management Software automatically selects the required CheckStar.
CheckStar

Each CheckStar has a military connector allowing it to be removed.
The tJRS Opta identifies which CheckStar Opta and beam are being used.

500Nm tJRS Opta.
Drive swivel UTA unit with angle for use on the 500 Nm beam.
½" swivel UTA unit with angle for use on 100 Nm beam.
Unit ¼" swivel UTA with angle for use on 10 Nm beam.

1000Nm tJRS Opta.
1 rotating UTA unit with 1000 Nm beam use angle.
½" rotating UTA unit with 330 Nm beam use angle.
3/8" rotating UTA unit with 25 Nm beam use angle.
Dimensions

330Nm and 500Nm tJRS Opt.
1100 mm (1200 mm including handle) x 600 mm x 940 mm (L x W x H).
Base above ground = 230mm.

1000Nm tJRS Opt.
1400 mm x 700 mm x 940 mm (L x W x H)
Base above floor = 140mm.
Reaction messages Standard reaction posts in appropriate positions that can take the forces generated by Torque.
The posts will snap to their supports for ease of use

 

Documentation

View Here

bottom of page