AA23LH18V2-28 AA-Series Pneumatic Hold and Drive Lever Shut-Off Tool 28 Nm
Pneumatic clutch-controlled hold and drive lever nutrunning tool for general fastening applications. Max torque: 28 Nm. Standard output: 50mm.
The AA23LH18V2-28 is an AA Series pneumatic hold and drive clutch shut-off tool intended for general fastening applications requiring mechanical clutch torque control.
The AA platform uses an adjustable clutch to control output torque and provide smooth disengagement at the preset torque, helping reduce vibration to the operator during assembly work.
The catalog describes AA tools as using trusted STANLEY output designs and a gearless reverse selection method to reduce complexity and support maintainability.
This model provides a catalog maximum torque of 28 Nm and should be applied where the documented hold and drive geometry and pneumatic clutch configuration match the assembly requirement.
Specifications
| Specification | Detail |
|---|---|
| Series | AA Series Pneumatic Air Clutch Tool |
| Power source | High-Power Air Motor |
| Trigger type | Lever Start Style |
| Output type | Hold and Drive |
| Head size/output code | 18V |
| Configuration | Standard |
| Max torque | 28 Nm |
| Rated speed | 485 RPM |
| Max torque equivalent | 20.7 lb ft |
| Side-to-center R | 18 mm (0.71 in) |
| Head height H | 190.3 mm (7.5 in) |
| Length L | 341.7 mm (13.5 in) |
| Weight | 1.8 kg (4.0 lb) |
| Travel/output | 50mm |
| Air consumption | 14.2 L/s (30 cfm) at 90 PSI / 6 Bar |
| Noise/vibration | conforms to ISO 28927-2 and ISO 15744 as stated in the catalog. |