TJMXX-0250-CRAGKX 250Nm tJRS
Automated threaded joint simulator test bench for realistic assembly tool auditing. Maximum torque: 250Nm.
The tJRS threaded joint rate simulator is a fully automated joint simulator test bench based on a threaded fastener. It enables offline testing of assembly tools under realistic joint conditions, automatically backs off and resets after each rundown, and uses Crane OMS software to configure and recall joint conditions. The system supports torque, angle and impulse count measurements for accurate tool auditing, certification and quality control.
Specifications
Product: 250Nm tJRS | Maximum torque: 250Nm | Beams: 250Nm, 50Nm and 10Nm | Minimum torque: 1 Nm | Joint mechanism: threaded fastener and nut system | Operation: automatic back-off and reset without removing the tool | Standards: follows VDI/VDE 2647 guidelines | Measurement modes: track, peak, click, pulse; torque, angle and impulse count | Power: 2 x 12V sealed lead acid batteries, approx. 8 hours typical use; internal charger, 100-240V mains | Controller: touch panel PC with solid state drive | Software: single OMS licence for standalone tJRS use | Hydraulics: 200 bar working pressure | Environment: indoor use, +10°C to +30°C
Tool Style
Joint Simulator Test Bench