EB55LH26V2-210 EB-Series Corded Hold and Drive Lever Tool 210 Nm
Corded, transducer-controlled hold and drive lever torque tool for precision threaded assembly applications. Max torque: 210 Nm.
The EB55LH26V2-210 is an EB Series corded DC electric lever start style hold and drive nutrunners designed for controlled threaded fastening in industrial assembly.
It is part of STANLEY Assembly Technologies' EB platform, which is engineered for precision fastening, process control and data collection in safety-critical and production environments.
The tool configuration supports hold and drive access geometry with a catalog maximum torque of 210 Nm, allowing it to be matched to applications where controlled torque, angle monitoring, fastening status and plant connectivity are required.
According to the EB datasheet, EB tools connect to plant infrastructure through STANLEY SC or QB series controllers for power and data connectivity, with collected data including torque, angle and job-configured OK/NOK status.
Use this model where the documented hold and drive geometry, torque range and lever start style configuration are appropriate for the fastening process.
Specifications
| Specification | Detail |
|---|---|
| Series | EB Series Corded DC Electric Tool |
| Power source | High-Power Electric Brushless Motor |
| Trigger type | Lever Start Style |
| Output type | Hold and Drive |
| Head size/output code | 26V |
| Configuration | Standard |
| Max torque | 210 Nm |
| Rated speed | 460 RPM |
| Max torque equivalent | 154.9 lb ft |
| Side-to-center R | 26 mm (1.02 in) |
| Head height H | 168.2 mm (6.6 in) |
| Length L | 637 mm (25.1 in) |
| Weight | 5.8 kg (12.8 lb) |
| Process data | torque, angle and job-configured OK/NOK status are supported through EB Series process-control architecture. |
| Connectivity | EB tools connect through STANLEY SC or QB series controllers; supported protocols listed in the datasheet include OPEN Protocol, TOOLSNET, PFCS, Toyota PI, NPL, FORD Protocol, Ethernet/IP and ProfiNet. |