AA33LH22AV2-110 AA-Series Pneumatic Hold and Drive Lever Shut-Off Tool 110 Nm
Pneumatic clutch-controlled hold and drive lever nutrunning tool for general fastening applications. Max torque: 110 Nm. Standard output: 14 to 110 Nm.
The AA33LH22AV2-110 is an AA Series pneumatic hold and drive clutch shut-off tool intended for general fastening applications requiring mechanical clutch torque control.
The AA platform uses an adjustable clutch to control output torque and provide smooth disengagement at the preset torque, helping reduce vibration to the operator during assembly work.
The catalog describes AA tools as using trusted STANLEY output designs and a gearless reverse selection method to reduce complexity and support maintainability.
This model provides a catalog maximum torque of 110 Nm and should be applied where the documented hold and drive geometry and pneumatic clutch configuration match the assembly requirement.
Specifications
| Specification | Detail |
|---|---|
| Series | AA Series Pneumatic Air Clutch Tool |
| Power source | High-Power Air Motor |
| Trigger type | Lever Start Style |
| Output type | Hold and Drive |
| Head size/output code | 22A |
| Configuration | 2 inch travel configuration |
| Max torque | 110 Nm |
| Rated speed | 141 RPM |
| Max torque equivalent | 81 lb ft |
| Side-to-center R | 22 mm (0.87 in) |
| Head height H | 199.0 mm (7.8 in) |
| Length L | 468.3 mm (18.4 in) |
| Weight | 3.3 kg (7.26 lb) |
| Travel/output | 14 to 110 Nm |
| Air consumption | 14.2 L/s (30 cfm) at 90 PSI / 6 Bar |
| Noise/vibration | conforms to ISO 28927-2 and ISO 15744 as stated in the catalog. |