Cutting Tools Division

DoALL Sawing Products

DoALL Band Sawing Machines

CUTTING TOOLS

DoALL SAWING PRODUCTS

DoALL GENERAL PURPOSE
BAND SAWING MACHINES

Fixed or swivel head models. manual or fully automatic operation. Whatever your application, there's a horizontal saw cut-off saw to meet your needs.

DoALL C-916M
C-916 M manual saw includes a swivel vise for miter cutting of up to 45° angles. Band tensioning is easily set by handwheel to 30,000 psi for more accurate cutting. Standard infinitely variable band speed adjustment from 105 to 275 fpm (32 to 83 m/min.).
Includes the following standard Equipment
- Saw guides, spring-loaded, carbide faced inserts
- Powered band brush
- One bi-metal saw band
- Recirculating coolant system. Submersible 4 gpm pump with 110V single phase motor and pressure connecting hose and fittings (60 Hz only)
- Fine adjustment head feed control
- Shovel rake
- Unloading tray, 19 x 24 in. (480 x 610 mm)
- Worklight (60 Hz machines only)
- Band door Interlocks
- Swivel vise jaws
- Instruction plate with sawing recommendations
- Complimentary coolant package
- Replaceable steel wear plates on bed
- Instruction and parts manual
- Saw blade guard

DoALL C-916S
C-916 S manual saw cuts any angle between 90° and 45° in 10-3/4” (273 mm) round material. American-made and combine maximum performance and versatility with guaranteed cut-off accuracy to +0.002 per inch of material cut.
Includes the following standard Equipment
- Saw guides, spring-loaded, solid-carbide inserts
- Swivel head to 45 degrees
- One bi-metal saw band
- Recirculating coolant system. Submersible 4 gpm pump with 110 v single phase motor and pressure connecting hose and fittings
- Fine adjustment head feed control
- Shovel rake
- Unloading tray, 19 x 24 in. (480 x 610 mm)
- Worklight
- Band door Interlocks
- Replaceable steel wear plates on bed
- Instruction plate with sawing recommendations
- DoALL cutting fluid
- Powered band brush
- Instruction and parts manual
- Saw blade guard

DoALL C-916A(VFD)
C-916 A features automatic indexing, pneumatic head lift and hydraulic feed control. Band tensioning is easily set by handwheel to 30,000 psi for more accurate cutting. Standard infinitely variable band speed adjustment from 105 to 275 fpm (32 to 83 m/min.).
Includes the following standard Equipment
- Saw guides, spring-loaded, carbide faced inserts
- Lever operated head position control
- Instruction and parts manual
- Recirculating coolant system. Submersible 4 gpm (15 liter/min) pump with 110V single phase motor and pressure connecting hose and fittings (60 Hz) (50 Hz use external mounted coolant pump)
- 1/2-hp (.375 Kw) triple pinch roll material drive
- One bi-metal saw band
- Pneumatic system with filtration plant air required - Min. 85 PSI at Min 1 CFM (5.86 bar at .472 Lt. Sec)
- Three roll discharge stand
- Shovel Rake and chip discharge chute
- Leveling screws
- Flushing hose
- Band door interlocks
- Mechanical variable vise pressure
- Worklight (60 Hz machines only)
- Complimentary coolant package
- Replaceable steel wear plates on bed
- Workheight selector
- Saw blade guard
- Powered band brush
- Instruction plate with sawing recommendations
- Preset cut counter
- Infeed idler conveyor, 5 ft. (1.5 M)

DoALL C-1321DS
Cuts any angle between 90° and 45° in 14” (355 mm) round material. American-made and combine maximum performance and versatility with guaranteed cut-off accuracy to +0.002 per inch of material cut.
Includes the following standard Equipment
- Saw guides, spring loaded with solid carbide inserts
- Powered band brush
- One bi-metal saw band
- Band mist lubricating system
- Powered head lift
- Chip shovel/rake
- Work support tray
- Swivel head to 45° right, 60° left
- Band door interlocks
- Pneumatic powered vise clamping with variable vise pressure
- Fine adjustment head feed control
- Complimentary coolant package
- Pneumatic alternating vise (right to left)
- Instruction plate with sawing recommendations
- Remote control console
- Replaceable steel wear plates on bed
- Instructions and parts manuals
- Saw blade guards

TOP

DoALL 500-SNC
An affordable NC controlled angle cutting saw that will increase flexibility and provide greater efficiency for general purpose sawing. The saw head swings 45 degrees , has an operator friendly NC, single stroke indexing to 40" and multiple indexing to 320". .
Includes the following standard Equipment
- Programable work station
- Out-of-stock sensor
- Complimentary coolant package
- Replaceable steel wear plates on bed
- Instructions and parts manuals
- Saw blade guards
- Powered band brush
- One bi-metal saw band
- Multiple index (8X)
- Band break switch
- Band door interlocks
- Cut counter
- Swivel head to 45°

DoALL C-330NC
Designed for a wide variety of materials, This double column, cut-off saw will cut everything from mild steel to structurals and tubing. The AC Inverter drive provides infinitely variable band speeds tailored to specific material requirements.
Includes the following standard Equipment
- Spring-loaded, zero clearance, carbide-faced saw guides
- Flushing hose
- Band door interlocks
- Coolant system integral coolant pump, coolant applied through saw guides
- Work height sensor
- Complimentary coolant package
- Discharge tray
- Blade guard
- Rapid travel index vise control
- One set of instruction and parts manual
- Multiple index 10X (max. 160 inches) (4,065mm)
- Powered band brush
- One bi-metal saw band
- ATF hydraulic oil for wide range temperature applications
- Band break switch
- Chip shovel
- 1-year warranty
- Job selector

DoALL C-430A
Compact and versatile, the C-430A Double Column Cut-Off Saw provides a full 17" (430 mm) round and square cutting capacity. The solid, double column construction with stress relieved head assembly and machined mounting positions for the band tension assembly, guide arms and band wheel drive insures accurate alignment.
Includes the following standard Equipment
- Spring-loaded, zero clearance, carbide-faced saw guides with lead-in roller on L.H. guide arm
- Transmission oil
- Band door interlocks
- Coolant system integral coolant pump, coolant applied through saw guides
- Easy set stock index length with digital readout
- Random cut positioning
- Rapid travel index vise control
- Work height sensor
- Complimentary coolant package
- Powered band brush
- Out of stock sensor
- Blade guard
- Saw head rapid approach control
- Instruction and parts manual
- Preset cut counter
- Job selector
- One bi-metal saw band
- ATF hydraulic oil for wide-range temperature applications
- Discharge tray with coolant return
- Chip shovel
- 1-year warranty
- Flushing hose