Cutting Tools Division

DoALL Sawing Products

DoALL Band Sawing Machines

CUTTING TOOLS

DoALL SAWING PRODUCTS

DoALL ANGLE CUTTING
BAND SAWING MACHINES

Universal tilt-frame saws are the ideal saws for cutting structurals, rounds, and tubular materials.

DoALL C-916S
C-916S manual saw cuts any angle between 90° and 45° in 10-3/4” (273 mm) round material. American-made and combine maximum performance and versatility with guaranteed cut-off accuracy to +0.002 per inch of material cut.
Includes the following standard Equipment
- Saw guides, spring-loaded, solid-carbide inserts
- Swivel head to 45 degrees
- One BI-METAL™ saw band
- Recirculating coolant system. Submersible 4 gpm pump with 110 v single phase motor and pressure connecting hose and fittings
- Fine adjustment head feed control
- Shovel Rake
- Unloading tray, 19 x 24 in. (482 mm x 609 mm)
- Worklight
- Band Door Interlocks
- Replaceable steel wear plates on bed
- Instruction plate with sawing recommendations
- DoALL cutting fluid
- Powered band brush
- Instruction and parts manual
- Saw blade guard

DoALL C1321DS
Cuts any angle between 90° and 45° in 14” (355 mm) round material. American-made and combine maximum performance and versatility with guaranteed cut-off accuracy to +0.002 per inch of material cut.
Includes the following standard Equipment
- Saw guides, spring loaded with solid carbide inserts
- Powered band brush
- One bi-metal saw band
- Band mist lubricating system
- Powered head lift
- Chip shovel/rake
- Work support tray
- Swivel head to 45° right, 60° left
- Band door interlocks
- Pneumatic powered vise clamping with variable vise pressure
- Fine adjustment head feed control
- Complimentary coolant package
- Pneumatic alternating vise (right to left)
- Instruction plate with sawing recommendations
- Remote control console
- Replaceable steel wear plates on bed
- Instructions and parts manuals
- Saw blade guards

DoALL 500-SNC
An affordable NC controlled angle cutting saw that will increase flexibility and provide greater efficiency for general purpose sawing. The saw head swings 45 degrees , has an operator friendly NC, single stroke indexing to 40" and multiple indexing to 320".
Includes the following standard Equipment
- Programable work station
- Out-of-stock sensor
- Complimentary coolant package
- Replaceable steel wear plates on bed
- Instructions and parts manuals
- Saw blade guards
- Powered band brush
- One bi-metal saw band
- Multiple index (8X)
- Band break switch
- Band door interlocks
- Cut counter
- Swivel head to 45°

DoALL TF-1822M
Ideal for a variety of applications in fabrication where angle cutting and general purpose sawing is performed. The compact design of the saw allows the operator to easily reach the swing and lock controls from the front of the machine.
Includes the following standard Equipment
- Spring-loaded, carbide-faced insert saw guides for 1-1/4 in. (35 mm) saw band
- Manual head tilt
- Worklight (60 Hz machines only)
- High-torque, hydraulic variable speed drive
- Job selector
- Instruction and parts manual
- Positionable moveable vise jaw
- Counter force guide block
- One BI-METAL™ saw band
- Replaceable wear plates on vise jaws and table
- Hydraulic positioned upper saw guide post
- Shovel rake
- Wheel driven band cleaning brush
- Calibrated feed force adjustment
- Complimentary coolant package
- Manual band tension
- Flushing hose
- ATF Hydraulic fluid
- Saw head forward stop

TOP

DoALL TF-2025M
TF 2025 Series machines are available in both manual and numerically-controlled models and feature angle cutting capabilities up to 60º in either direction. Both the manual and NC models feature standard variable vice pressure controls, hydraulic head tilt with digital readout, full stroke hydraulic clamp cylin- ders and PLC operator controls.
Includes the following standard Equipment
- Spring-loaded, carbide-faced insert saw guides for 1-1/4 in. (34 mm) saw band
- Replaceable wear plates on vise jaws and table
- Calibrated feed force adjustment
- 60˚ left and right angle cutting capability
- Wheel driven band cleaning brush
- Flushing hose
- Coolant system, separate pump and motor
- Hydraulic band tension and break switch
- Instruction and parts manual
- High-torque, hydraulic variable speed drive
- Linear bearings for head carriage
- One bi-metal saw band
- Hydraulic positioned upper saw guide post
- Hydraulic head-tilt with digital readout
- Shovel-rake
- Full stroke hydraulic clamp cylinders
- Job selector
- Idler wheel motion detector
- Variable vice pressure controls
- Flushing hose
- ESL Antiwear hydraulic oil
- Replaceable wear plates on vise jaws and table
- Instruction and parts manuals

DoALL TF-2025NC
TF 2025 Series machines are available in both manual and numerically-controlled models and feature angle cutting capabilities up to 60º in either direction. Both the manual and NC models feature standard variable vice pressure controls, hydraulic head tilt with digital readout, full stroke hydraulic clamp cylin- ders and PLC operator controls.
Includes the following standard Equipment
- Spring-loaded, carbide-faced insert saw guides for 1-1/4 in. (34 mm) saw band
- Wheel driven band cleaning brush
- One bi-metal saw band
- 60˚ left and right angle cutting capability
- Hydraulic band tension and break switch
- Shovel-rake
- Electronic cut time monitor
- Linear bearings for head carriage
- Band door interlocks
- Coolant system, separate pump and motor
- Hydraulic head tilt with digital readout
- Idler wheel motion detector
- High-torque, hydraulic variable speed drive
- Job selector
- Random cut position control
- Switchable inch/metric readout
- Hydraulic positioned upper saw guide post
- Complimentary coolant package
- Full stroke hydraulic clamp cylinders
- Calibrated feed force adjustment
- PLC operator controls
- Variable vice pressure controls
- Flushing hose
- ESL Antiwear hydraulic oil
- Replaceable wear plates on vise jaws and table
- Instruction and parts manuals

DoALL TF-2025
TF 2525M manually controlled tilt frame machines with hydraulic head tilt are ideal for angle sawing of large workpieces. Their rugged design and large capacity, coupled with available material handling devices, make them ideal saws for any automated sawing system.
Includes the following standard Equipment
- Zero clearance, spring-loaded, carbide-faced insert saw guides for 1-1/2 in. (40 mm) saw band
- Hydraulic band tension, factory set for high-speed steel saw band with safety limit switch
- One set of wrenches
- Hydraulic frame tilting, calibrated quadrant to show degree of tilt, hydraulic lock
- Dual-approach rates
- Instruction and parts manuals
- Coolant system with separate 1/3 hp pump motor
- Miter meter head angle indicator reads angles of ±45° within ±10 accuracy
- One bi-metal saw band
- Full-cycle operation; frame returns automatically after completing cut
- Hydraulic guide post elevation
- Complimentary coolant package
- Variable speed heavy-duty, hi-torque hydraulic drive
- Table/chip conveyer hand crank
- Hydraulic oil heat exchanger
- Replaceable steel wear plates on vise jaws
- Flushing Hose
- ATF hydraulic fluid
- Wheel driven band brush

DoALL C-650S
DoALL's dual column swivel production cut-off saws offer exceptional capacity and numerous standard features. A powerful 10hp band drive and a 2" wide band saw blade handle workpieces to 26" diameter with an accuracy of +/- .002" per inch.
Includes the following standard Equipment
- Hydraulic actuated, zero clearance carbide faced saw guide inserts
- Hydraulic band tension
- Teflon and bronze column bushings
- Mist blade lubrication system
- Rapid saw head approach (button control)
- Instruction and spare parts manual
- Servo controlled feed pressure
- Digital angle readout
- One bi-metal saw band
- Manual and semi automatic cut cycles
- Band canted 6°
- Chip shovel
- Infinitely variable band speed inverter drive
- Hydraulic powered left hand guide arm
- Bandwheel door interlocks
- Hydraulically driven band cleaning brush
- Hardened, ground and polished hard chromed guide columns
- Complimentary coolant package
- Band break switch
- Powered chip conveyor
- ATF hydraulic oil for wide range temperature applications
- Switchable, digital readout of band speed, either FPM or M/M

DoALL C-1000-650S
These double column swivel base saws are designed for cutting a wide variety of structural materials. The C-1000/650S will cut 45° angles either left or right. Degree of the saw angle swivel is electronically displayed. The head is canted 3° for more efficient cutting of structurals and tubing.
Includes the following standard Equipment
- Hydraulic actuated, zero clearance carbide faced saw guide inserts
- Hydraulic band tension
- Teflon and bronze column bushings
- Mist blade lubrication system
- Rapid saw head approach (button control)
- Instruction and spare parts manual
- Servo controlled feed pressure
- Digital angle readout
- One bi-metal saw band
- Manual and semi automatic cut cycles
- Band canted 6°
- Chip shovel
- Infinitely variable band speed inverter drive
- Hydraulic powered left hand guide arm
- Bandwheel door interlocks
- Hydraulically driven band cleaning brush
- Hardened, ground and polished hard chromed guide columns
- Complimentary coolant package
- Band break switch
- Powered chip conveyor
- ATF hydraulic oil for wide range temperature applications
- Switchable, digital readout of band speed, either FPM or M/M